How to Replace Door Handles
The door handles in your home are an essential element of your decor. A new handle can transform your space and bring your decor to the present.
Over time the knobs on your door could become stiff, or even break. These are indications that it's time to replace the knobs. This guide will help you select the right replacement door handle for your home.
Door Knobs
The handles on your doors can enhance the appearance of your house and allow you to shut and open them. Go At this site are available in a wide range of colors, finishes and styles that will complement your decor. If yours are starting to begin to show signs of wear or simply require an upgrade replacing them is easy and can be accomplished in just a few steps.
The first thing you have to find is the shaft or spindle through which the knob is attached to the door. Some have a small hole that you can put the screwdriver with a small diameter to remove the set screws that hold the handle in place. Some have a thin slot, or hole, that you can press a spring-activated detent pin with a flathead. This pin lets go of the latch mechanism, and lets you to pull or push the knob.
Once you have the spindle or shaft in your hands Remove the knob and replace it. Be sure to align it properly and then verify that the latch works properly before tightening the new set screws.
After replacing the knob, put the latch rod over the hole on the door. Secure it by securing it to the rod system on the second knob. Make sure the holes are in alignment, then tighten the screws for the latch plate.
Some people prefer an brushed or smooth metal finish for the door hardware to give their home a modern and sleek appearance. This will match their furniture. Others prefer a more rustic style, which pairs well with rustic-styled rooms. If you have family members who are unable to move You may be interested in an rim lock or a lever knobs for doors that require less pressure to operate.
While aesthetics have traditionally been the primary consideration for door handle design, other factors are becoming more important too. Accessibility and control of infections are the main issues that have led to the creation of innovative new handle designs like those that can be operated with the forearms of a person.
Latch
The latch that holds the door handle open may wear out over time. Switching out the old latch to make room for an entirely new handle can be an easy DIY project and it will make a huge change in the way your door opens and closes.
Depending on the type of knob you have depending on the type of handle you have, the latch may be part of the knob or it might be an independent piece that is attached to the door. In either case, you will follow the same procedure to remove and replace. Getting the old latch out of the way is relatively simple particularly if your door handle has what's known as a "magic button". This little pressure-slot, located on the side knob, is what you have to press to pop the latch out of the handle.
If your handle does not have this button, the first step is to take off any cover plates that are positioned over the latch plate. These are usually rectangular or circular and can be removed with a screwdriver. Some have a small hole in them that you can put your screwdriver, whereas others simply snap off.
The next step is to remove the two machine screws that hold the latch and the plate to the door handle. It is important to keep these shorter screws with sharp tips in a secure location so that you can reuse them in the future. Once the screws are removed you can remove the latch plate and mechanism out of the door's hole and place it in a safe place.
Then you can begin to install the new latch. Install the inside plate of the latch into the hole in the door and secure it with the hardware provided. Make sure that the square pin on the inside of the latch is pointing towards the latching mechanism inside the handle and that it lines up with the other screw chambers of the door handle. Then push the exterior latch plate on and secure it using the screws provided.
Strike Plate
One of the most frequent reasons to replace the door handle is because it is loose or isn't locking properly. This is typically caused by misaligned parts in the latching system, such as a striking plate that's either too short or has moved up or downward on the doorjamb with time. This project allows you to replace your old strikeplate with an extended one, which can provide more security for your door and will keep it shut.
To check if the problem is caused by the strike plate, apply lipstick or a similar marking material to the bolt that is used to latch. Close the door and try to latch it. If the mark is below the strike plate's hole, this indicates that your door isn't latching because the strike plate is too small. If the mark is higher than the strike plate hole, it's likely that the strike plate has been moved up or down on the doorjamb.
Depending on the door You may be able to just attach the new strike plate into place over the old one, using the screws that come with it. However, you may need to drill holes prior to drilling and then chisel some of the wood to ensure it's a snug fit. If this is the case Be careful not to be too rough with the chiseling process or you could damage the strength of the doorjamb.
Installing a brand new box-style strike plate will provide the lock with a stronger hold on the doors and will require more force to open them. Typically it requires two long screws to secure the strike plate to the door frame. To do this, you'll have to take off the existing strike plate and then drill and chisel the wood to make room for the new one.
This difficult-to-find strike plate was specifically designed to work with rim locks from the past, and is made of sturdy solid brass in an extremely thick. This kit includes wood screws as well as machine screws, so you can select the appropriate hardware to suit your requirements. Be aware that the wood screws have a pointy edge, whereas the machine screws are more blunt.